Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) adding boron trifluoride diethyl etherate (BF3·Et2O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced

• the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated. Keywords: alkyne hydration; boron trifluoride; electrochemical synthesis; ionic liquids; Introduction Alkynes are fundamental starting materials towards more

• with alternative solvents could represent an important innovation for alkyne hydration. In particular, ionic liquids (ILs) could represent a valid alternative to conventional organic solvents. ILs are generally liquid salts at or near room temperature, formed by large unsymmetrical organic cations and

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• -catalyzed sulfenylation by N-(sulfenyl)succinimides/phthalimides In 2012, Chen and co-workers found that in the reaction of N-(organothio)succinimides 1 and sodium sulfinates 2 using a Lewis acid in ionic liquids (ILs) and water as a green solvent system leads to the formation of thiosulfonates 3 (Scheme 2

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• [75]. However, the major drawback with using these catalysts in A3 reactions was the loss of the catalyst at the end of the reaction. Furthermore, on using Au(I), Ag(I), and Cu(I) in ionic liquids, as well as supported Au(III), Ag(I), CuI, and CuCl to catalyze A3 coupling reactions under heterogeneous

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• nanoorganocatalysts. Various solvent systems, such as aqueous conditions, different organic solvents, solvent-free conditions, ionic liquids, and DESs, have been reported in modified Clauson–Kaas reactions at room temperature, under thermal and microwave-assisted conditions. In the Clauson–Kaas reaction mechanism

• various acids and ionic liquids such as [hmim][HSO4], CH3COOH, [hmim][H2PO4], and [bmim][BF4] was investigated. Among these, [hmim][HSO4] proved to be the best catalyst providing higher yields in shorter time. This protocol provides a greener, environmental friendly, and a cleaner route for the synthesis

Friedel–Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs)

• Swantje Lerch,
• Stefan Fritsch and
• Thomas Strassner

Beilstein J. Org. Chem. 2023, 19, 212–216, doi:10.3762/bjoc.19.20

• liquids (TAAILs) has been developed. Through optimization of the metal salt, reaction conditions and ionic liquids, we were able to design a robust catalyst system that tolerates different electron-rich substrates under ambient atmosphere and allows for a multigram scale. Keywords: Friedel–Crafts

• acylation; homogeneous catalysis; ionic liquids; iron catalysis; TAAILs; Introduction The Friedel–Crafts acylation is one of the oldest metal-catalyzed reactions in organic chemistry [1] and allows for the synthesis of a broad range of diverse compounds [2][3][4][5]. Starting from electron-rich aromatic

• compounds, acylation is possible by an organic acid chloride/acid anhydride and a Lewis acid [6][7]. In the course of the development of ionic liquids (ILs) as a reaction medium for chemical reactions [8][9], the Friedel–Crafts reaction was also examined [10][11][12][13][14][15][16]. First protocols were

Cyclodextrin-based Schiff base pro-fragrances: Synthesis and release studies

• Attila Palágyi,
• Jindřich Jindřich,
• Juraj Dian and
• Sophie Fourmentin

Beilstein J. Org. Chem. 2022, 18, 1346–1354, doi:10.3762/bjoc.18.140

• hydrolysis, oxidation, or light (Figure 1) [18]. Different substrates were used to synthesize pro-fragrances, like polymers [19], ionic liquids [20], rotaxanes [21], or saccharides [22]. To the best of our knowledge, no studies investigate the use of CDs as substrate. Linking the fragrance to CDs could

First example of organocatalysis by cathodic N-heterocyclic carbene generation and accumulation using a divided electrochemical flow cell

• Daniele Rocco,
• Ana A. Folgueiras-Amador,
• Richard C. D. Brown and
• Marta Feroci

Beilstein J. Org. Chem. 2022, 18, 979–990, doi:10.3762/bjoc.18.98

• used as organocatalyst in two classical umpolung reactions of cinnamaldehyde: its cyclodimerization and its oxidative esterification. Keywords: Breslow intermediate; cathodic reduction; flow electrochemistry; N-heterocyclic carbene; oxidative esterification; Introduction Ionic liquids (ILs) are well

• known salts, at present used in a wide variety of chemical fields. The first definition of ionic liquids was given by Paul Walden in 1914: “they are materials composed of cations and anions, that melt around 100 °C or below as an arbitrary temperature limit” [1]. ILs are salts formed by non or weakly

• coordinated cations and anions, usually bulky organic cations and inorganic or organic anions such as −BF4, −PF6, −N(CF3SO2)2, etc. [2][3]. The physicochemical properties of RTILs (room temperature ionic liquids) are reported in the literature and include very low vapor pressure, and thus the possibility to

Synthesis of 5-unsubstituted dihydropyrimidinone-4-carboxylates from deep eutectic mixtures

• Sangram Gore,
• Sundarababu Baskaran and
• Burkhard König

Beilstein J. Org. Chem. 2022, 18, 331–336, doi:10.3762/bjoc.18.37

• replacement of organic solvents. The melts are stable against air and have very low vapor pressures resembling the properties of ionic liquids. In addition, the polarity of these melts is very high [33]. Recently, we have explored several organic transformations such as coupling reaction, cycloaddition

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones – an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones

• Alla I. Vaskevych,
• Nataliia O. Savinchuk,
• Ruslan I. Vaskevych,
• Eduard B. Rusanov,
• Oleksandr O. Grygorenko and
• Mykhailo V. Vovk

Beilstein J. Org. Chem. 2021, 17, 2787–2794, doi:10.3762/bjoc.17.189

• derivatives with 4-chloroketones or 4-oxocarboxylic acids in ionic liquids [20][21][22][23] or refluxing acetic acid [24][25]. An alternative approach involves cascade cyclization of anthranilamides with 4-chlorobutanoyl chloride [26][27]. Also, reductive cyclocondensation of 2-nitrobenzamides and

Constrained thermoresponsive polymers – new insights into fundamentals and applications

• Patricia Flemming,
• Alexander S. Münch,
• Andreas Fery and
• Petra Uhlmann

Beilstein J. Org. Chem. 2021, 17, 2123–2163, doi:10.3762/bjoc.17.138

• the halide anions Cl−, Br−, and I−-, respectively, UCST behavior can also be induced in polymeric ionic liquids by the addition of a suitable hydrophobic counterion, such as tetrafluoroborate BF4− [288][289]. In both cases, the critical phase transition temperature is strongly affected by the

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• for the water removal instead employed either DMSO or ionic liquids as additives for the water removal. The same condensation (of 17 to 127) was also performed by Clark et al. using a silica-coated microreactor with an AP-T catalyst deposited on the reactor’s walls [160]. The solvent-free approach

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• reaction suffers from drawbacks such as harsh reaction conditions, longer reaction time and low yields [70]. Several attempts have been made to improve the reaction conditions using various catalyst/reagents, ionic liquids etc. [71][72]. Contributing to this need, dos Anjos et al. [73] reported a base

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• nitrogen-based catalysts, ionic liquids [123][124] and alcoholysis of oxygen-containing polymers, such as polyesters, polycarbonates and polyamides, i.e., glycolysis of PET, wherein high temperatures and nearly stoichiometric amounts of catalysts are often required to achieve moderate yields of monomers

• catalysts in the form of ionic liquids (ILs) [209]. Advantages of metallated ILs include low flammability, high thermal stability and versatility. However, their “greenness” and toxicity are still debated [225][226]. Thus, amim[ZnCl3] (amin = 1-allyl-3-methylimidazolium, Table 4, entry 1) [227] and amim

• [ZnCl3] (bmim = 1-butyl-3-methylimidazolium, Table 4, entry 2) [228] were recently studied, showing higher catalytic activity compared to metal-free ionic liquids (i.e., bmim chloride), the conventional catalysts (i.e., ZnCl2, Zn(OAc)2) or the analogous Mn, Co and Cu ionic liquids. Typically, 80–85% BHET

Mesoionic tetrazolium-5-aminides: Synthesis, molecular and crystal structures, UV–vis spectra, and DFT calculations

• Vladislav A. Budevich,
• Sergei V. Voitekhovich,
• Alexander V. Zuraev,
• Vadim E. Matulis,
• Vitaly E. Matulis,
• Alexander S. Lyakhov,
• Ludmila S. Ivashkevich and
• Oleg A. Ivashkevich

Beilstein J. Org. Chem. 2021, 17, 385–395, doi:10.3762/bjoc.17.34

• attractive as environmentally friendly pyrotechnics [4], insensitive high-energy materials [5][6][7], and promising energetic ionic liquids [8][9][10]. The most interesting and less examined 5-aminotetrazole derivatives are tetrazolium-5-aminides, which can be depicted as 4 by analogy with other mesoionic

An atom-economical addition of methyl azaarenes with aromatic aldehydes via benzylic C(sp³)–H bond functionalization under solvent- and catalyst-free conditions

• Divya Rohini Yennamaneni,
• Vasu Amrutham,
• Krishna Sai Gajula,
• Rammurthy Banothu,
• Murali Boosa and
• Narender Nama

Beilstein J. Org. Chem. 2020, 16, 3093–3103, doi:10.3762/bjoc.16.259

• stability of 1-phenyl-2-(2-pyridyl)ethanol [32]. Different catalysts such as ionic liquids [33], CuFe2O4 [34], and Ca(OTf)2 [35] were also utilized. Due to the abundant importance of these products, several different approaches were reported (Scheme 1 and Scheme 2). These higher azaarene products were also

Ultrasound-assisted Strecker synthesis of novel 2-(hetero)aryl-2-(arylamino)acetonitrile derivatives

• Emese Gal,
• Luiza Gaina,
• Hermina Petkes,
• Alexandra Pop,
• Castelia Cristea,
• Gabriel Barta,
• Dan Cristian Vodnar and
• Luminiţa Silaghi-Dumitrescu

Beilstein J. Org. Chem. 2020, 16, 2929–2936, doi:10.3762/bjoc.16.242

• using “green” solvents, for example, low vapor pressure solvents such as ionic liquids [3], low volatile solvents such as glycerol, ethylene glycol and its oligomers, or nontoxic water solvent, as well as in heterogeneous media under solvent-free conditions [4]. Other advantages induced by sonication

Selective and reversible 1,3-dipolar cycloaddition of 6-aryl-1,5-diazabicyclo[3.1.0]hexanes with 1,3-diphenylprop-2-en-1-ones under microwave irradiation

• Alexander P. Molchanov,
• Mariia M. Efremova,
• Mariya A. Kryukova and
• Mikhail A. Kuznetsov

Beilstein J. Org. Chem. 2020, 16, 2679–2686, doi:10.3762/bjoc.16.218

• with carbon disulfide [26], diphenylketene [27], β-nitrostyrenes [28][29], if ionic liquids (IL) were used as reaction media. The reaction of β-nitrostyrenes with azomethine imines proceeds giving mixtures of Michael and anti-Michael-type adducts, containing a nitro group at the C2- or C1-position of

• pyrazolines 4a and 4b. At the same time, the reaction of DABCH 1b with chalcone 2a also gives adducts 3m and 3a and the same pyrazolines 4a and 4b. As it was marked in the literature, the reactions were expected to occur in ionic liquids more selectively than in organic solvents owing to the stabilization of

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• , Janssen-Cilag, S.A., C/ Jarama 75A, Toledo, Spain 10.3762/bjoc.16.159 Abstract The combination of supported ionic liquids and immobilized NHC–Pd–RuPhos led to active and more stable systems for the Negishi reaction under continuous flow conditions than those solely based on NHC–Pd–RuPhos. The fine tuning

Activated carbon as catalyst support: precursors, preparation, modification and characterization

• Melanie Iwanow,
• Tobias Gärtner,
• Volker Sieber and
• Burkhard König

Beilstein J. Org. Chem. 2020, 16, 1188–1202, doi:10.3762/bjoc.16.104

• , agricultural wastes or biomass as well as ionic liquids, deep eutectic solvents or precursor solutions. The preparation of the activated carbon usually involves pre-treatment steps followed by physical or chemical activation and application dependent modification. In addition, highly porous materials can also

• the production of activated carbon [4]. Fossil and renewable sources for the preparation of activated carbon are discussed in this part of the review, as well as special precursor solutions or ionic liquids and deep eutectic solvents as non-conventional precursor materials. The properties of the

• residues is lower compared to anthracite or coal as starting materials. Nevertheless, high volatile matter content in the biomass are advantageous for the production of porous activated carbon materials as well as the low cost of the agricultural waste [22]. Ionic liquids and deep eutectic solvents Zhang

The charge-assisted hydrogen-bonded organic framework (CAHOF) self-assembled from the conjugated acid of tetrakis(4-aminophenyl)methane and 2,6-naphthalenedisulfonate as a new class of recyclable Brønsted acid catalysts

• Svetlana A. Kuznetsova,
• Alexander S. Gak,
• Yulia V. Nelyubina,
• Vladimir A. Larionov,
• Han Li,
• Michael North,
• Vladimir P. Zhereb,
• Alexander F. Smol'yakov,
• Artem O. Dmitrienko,
• Michael G. Medvedev,
• Igor S. Gerasimov,
• Ashot S. Saghyan and
• Yuri N. Belokon

Beilstein J. Org. Chem. 2020, 16, 1124–1134, doi:10.3762/bjoc.16.99

• zeolites, MOFs, or COFs, a broader scope of applications has to be investigated. We thought that the CAHOFs present a very promising material, as they can be considered as heterogeneous ionic liquids with a great potential for becoming efficient heterogeneous, purely organic catalysts. In particular, salts

Oligomeric ricinoleic acid preparation promoted by an efficient and recoverable Brønsted acidic ionic liquid

• Fei You,
• Xing He,
• Song Gao,
• Hong-Ru Li and
• Liang-Nian He

Beilstein J. Org. Chem. 2020, 16, 351–361, doi:10.3762/bjoc.16.34

• difficulties. Therefore, it is urgently desirable to develop an efficient, green and recyclable catalyst and design simple operating procedures for the preparation of estolides oligomeric ricinoleic acid. Ionic liquids (ILs) have been proved to be efficient catalysts in various organic syntheses due to the

• excellent catalytic activity for this intermolecular esterification reaction and Brønsted acidic ionic liquids have been successfully used as catalyst in organic syntheses [29][30][31], we designed a series of Brønsted acidic ionic liquids and applied them as catalysts for the preparation of oligomeric

• that the cation also affected the catalytic activity of the IL. Taking the decrease of acid value as catalytic activity index, the ionic liquid 1-butanesulfonic acid triethylamine dihydrogen phosphate ([HSO3-BNEt3]H2PO4) performed best among the tested ionic liquids in this study (Table 1, entry 8

Palladium-catalyzed Sonogashira coupling reactions in γ-valerolactone-based ionic liquids

• László Orha,
• József M. Tukacs,
• László Kollár and
• László T. Mika

Beilstein J. Org. Chem. 2019, 15, 2907–2913, doi:10.3762/bjoc.15.284

• chemistry; ionic liquids; Introduction In the past few decades, the transition-metal-catalyzed coupling reaction has represented one of the most powerful and atom economical strategies for the efficient assembly of new carbon–carbon bonds. It has therefore become the most attractive approach to the

• recently γ-valerolactone [19]. The series of these alternative media can implicitly be continued by ionic liquids (ILs) [20], which have attracted considerable attention, due to their extremely low vapor pressure, good solvating properties, reasonable thermal stability, and easily tuneable physical

• properties [21]. Accordingly, the Sonogashira reactions were also successfully performed in conventional ionic liquids such as [BMIM][PF6] [22][23][24][25], [BMIM][BF4] [23], [HMIM][BF4] [24], [EMIM][NTf2] [26], [nBuPy][X] (X = PF6–, BF4–, NO3–) [27], [DectBu3P][BF4] [28]. It was found that some of these

1,2,3-Triazolium macrocycles in supramolecular chemistry

• Mastaneh Safarnejad Shad,
• Pulikkal Veettil Santhini and
• Wim Dehaen

Beilstein J. Org. Chem. 2019, 15, 2142–2155, doi:10.3762/bjoc.15.211

• mechanically interlocked molecules and molecular machines. We will not concern ourselves in this review with the applications of metal complexes based on N-heterocyclic carbene coordination chemistry, derived of triazoliums or with applications as ionic liquids [26][27][28]. 2. Anion recognition Due to the

Functional panchromatic BODIPY dyes with near-infrared absorption: design, synthesis, characterization and use in dye-sensitized solar cells

• Quentin Huaulmé,
• Cyril Aumaitre,
• Outi Vilhelmiina Kontkanen,
• David Beljonne,
• Alexandra Sutter,
• Gilles Ulrich,
• Renaud Demadrille and
• Nicolas Leclerc

Beilstein J. Org. Chem. 2019, 15, 1758–1768, doi:10.3762/bjoc.15.169

• organic counterpart, i.e., bulk heterojunction solar cells, or other hybrid PV technologies such as perovskite solar cells. DSSCs can display satisfactory power conversion efficiencies (PCE) in the range of 10 to 14% [1][2][3] but also a long-term stability when specific electrolytes based on ionic

• liquids are employed [4][5]. Besides, this technology enables the fabrication of solar panels that can be prepared semi-transparent, colorful, and out of non-toxic constituents [6]. Historically, Ru(II)–polypyridyl complexes were the most used dyes as photosensitizers in DSSCs (N719 or N749 Black Dye) [7